Please consult the MSDS/SDS for specific information for each product prior to use.
Handle in well ventilated area.
Close container tightly during and after use.
Keep away from open flame, spark or heat-source.
Ground equipment for prevention of static electricity.
Use explosion proof, electrical appliance or apparatus.
Use spark proof hand-tools.
Keep dirty rags, paint sludge and paint dust soaking in water before disposal.
Wear proper protective clothing to avoid contact with skin, eyes, mucous membranes and clothing. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.
Clean hands and face thoroughly after handling. Do not bring contaminated protective gloves, goggles and caps, etc., in confined spaces.
Install proper local ventilation and wear respirator in closed working space.
STORAGE:
Please consult the MSDS/SDS for specific information for each product prior to use.
Store under cool, dark, well ventilated conditions. Avoid direct sunlight.
Keep away from ignition source or heat source. Keep containers upright and tightly closed when not in use.
ENGINEERING CONTROLS:
Please consult the MSDS/SDS for specific information for each product prior to use.
Use explosion proof type equipment.
Install proper exhaust to prevent high concentration of vapor.
Ground equipment for fluid transfer, pumping and stirring.
Arrange the area of handling place so as to cut off the influence of heat or ignition source.
In indoor application, use automatic application equipment or a local exhaust so operators can avoid exposure to fumes, or other equipment devised for them to avoid exposure to vapors.
PERSONAL PROTECTIVE EQUIPMENT:
Please consult the MSDS/SDS for specific information for each product prior to use.
Eye/Face Protection: Wear safety goggles.
Skin Protection: Wear gloves impervious to organic solvent and chemical.
Respiratory Protection: Wear gas mask for organic gas. Wear air mask in closed space.
